Peugeot 307 Seats


Created: 06. 05. 2004
Updated: --. --. ----

Model:
307 All models.
Problem:
The panels keep falling off the front seats' backrest.
Solution:
Here is how to secure the back panels that keep falling of the Peugeot 307 seats.
First purchase the following part, one set per seat to be repaired.

This work can be done with the seats in the car. No need to remove the seats.
The first kit contains 2 strips that attach to the seat's vertical bars and one strip that attaches to the horizontal bar at the top of the seat.
The vertical strips can be replaced without removing any parts, just remove the old section and then push the new part onto the seat frame. In most cases it may be sufficient to just replace these 2 parts. It is advisable to visually inspect the horizontal strip at the top of the seat and only replace that part if there is a gap in the clamping section.
The replacement of the upper strip requires the removal of the entire backrest covering and is therefore only recommended if it's absolutely necessary.


Technical information by
peugeotlogic.com